Industrial Oven Manufacturer From India

Industrial Oven

Flux Drying Oven

Flux Drying Oven

Make An Enquiry
Shrink Packaging Oven

Shrink Packaging Oven

Make An Enquiry
Paper Cone Drying Oven

Paper Cone Drying Oven

Make An Enquiry
Ceramic Paint Baking Oven

Ceramic Paint Baking Oven

Make An Enquiry
Ultrasonic Drying Oven

Ultrasonic Drying Oven

Make An Enquiry
High Temperature Testing Oven

High Temperature Testing Oven

Make An Enquiry
Electro Plating Oven

Top Loading (Electro Plating Oven)

Make An Enquiry
Gasfired Oven

Gasfired Oven

Make An Enquiry
Varnish Baking Oven

Varnish Baking Oven

Make An Enquiry
Paint Baking Oven

Paint Baking Oven

Make An Enquiry
96 Tray Dryer

96 Tray Dryer ( Steam Operated)

Make An Enquiry
Vertical Operated Sliding Door

Vertical Operated Sliding Door

Make An Enquiry
Gasfired Oven

Gasfired Oven

Make An Enquiry
Industrial Oven

GENERAL SPECIFICATIONS

CONSTRUCTION: M.S.ANGLE FRAME

  • 40 mm X 40 mm X 5 mm ( Small Size)
  • 50 mm X 50 mm X 5 mm ( Big Size)
  • 18 Swg. for Temp. up to 250 Deg.c
  • 16 Swg. for Temp. up to 450 Deg.c The inside can be in S.S. 304 / S.S. 316 / S.S 310

DOOR :

Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.

INSULATION :

Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature.

HEATING :

The oven is heated electrically by specially designed S.S.Tubular/ Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO.

AIR CIRCULATION :

Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.

TEMPERATURE CONTROLLER :

Temperature inside the Oven is controlled by Thermostate or Digital Temp.controller or PID Controller with Thyristor Power Pack. Depending upon application.

ACCESSORIES :

Strip Chart Recorder / Circular Chart Recorder / PLC Controller.

LOCKING :

Ball catch type or Special locking arrangement depending upon application.

TRAYS / TROLLIES :

Trays and Trolly and other type of loading arrangement are provided to suit application.

PAINT :

Inside heat resist Aluminium Silver out side Nickel Grey OR Any plain color.

Technical specification

STANDARED MODELS

TEMPERATURE RANGES :

50 TO 150 DEGC., 50 TO 250 DEGC. 50 TO 450 DEGC. 50 TO 600 DEGC.

MODEL NO. INNER SIZE
Height Width Depth
AI - 3 1.5' 1.5' 1.5'
AI - 8 2' 2' 2'
AI - 12 3' 2' 2'
AI - 27 3' 3' 3'
AI - 36 4' 3' 3'
AI - 45 5' 3' 3'
AI - 64 4' 4' 4'
AI - 96 6' 4' 4'
AI - 125 5' 5' 5'
AI - 150 6' 5' 5'
AI - 216 6' 6' 6'
AI - 252 7' 6' 6'
AI - 343 7' 7' 7'